1 / 8
Mini ATX Open Frame (v2.0) with SSD Support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An open 3d printed frame for Mini ATX (and a bit larger) motherboards.
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 406
- Makes
- 1
- Views
- 3,192
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
An open 3d printed frame for Mini ATX (and a bit larger) motherboards. It is sitting on top of the PSU and has 30mm standoff brass spacers to allow for ventilation of the PSU as well as space to hide the cables. It features support for up to 2x SSD Drives or 2.5" HDD drives.
You will need 6 or 8 M3 square nuts and 4 M3 Standoffs (brass or nylon is fine) for mounting the board on the case and mounting the ssd/hdd case(s) to the sides.
Print instructions
Simply print flat on the surface. Use 0.2mm or even 0.3mm layer height.