IKEA KROKFJORDEN shower shelf mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This modification allows KROKFJORDEN to be safely hung directly on straight glass walls.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 19
- Makes
- 0
- Views
- 732
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use this cheap and effective shelf without it constantly hitting the glass wall of my shower. So I created this little modification. It's a press fit design, no glue or other tools are needed. However, keep in mind that KROKFJORDEN is not a particularly precisely made product and the dimensions of some parts may vary significantly. I've tried my best to minimize the risk of parts not fitting properly.
There are 2 parts (differences between versions are explained in the file descriptions):
- Upper adapter (you will need 2 of them)
- Lower hook/spacer
Print instructions
I recommend using PETG (tolerances were tested for this material only) or other slightly compliant material. I just used the standard Prusament PETG profile from PrusaSlicer: 0,2 mm layer height, 2 perimeters, 20% grid infill, and no support.
Assembly
Just press parts into the right places as seen in the picture above. It may require quite a lot of force but then it should snugly click into the right space.