Raynox 150/250 covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover and holder for the Raynox 150/250 macro lens
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 123
- Makes
- 7
- Views
- 645
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
IMPORTANT, THIS DESIGN IS NOT ALLOWED TO SELL!
The case supplied with the Raynox 250 magnification macro lens is ridiculously large so I designed this simple yet effective rear cover and front lens cap.
Print without support. After print, wiggle the tabs slightly and then place the cap with a tab towards a hard surface and push firmly until it snaps loose. Do the same for the other side. There's only a 0.3mm gap in the design so it will probably stick together somewhat. I've printed in 0.15mm PLA and PETG without issues.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6