PiZero Vertical Screwless Camera Housings GPIO remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of PiZero Vertical Screwless Camera Housings by gowen with cutouts for GPIO
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of PiZero Vertical Screwless Camera Housings by gowen with cutouts for GPIO.
I used a pi zero model to cut the minimum amount of area required to make gpio accessible, at least as much as possible.
The only suggestion would be to modify the clamp file to remove the thin strip of plastic on the side of the GPIO. I thought it was going to help with clamping but in the end it was too thin and was only in the way of accessing the pins, so i snipped it after printing. The model can be re-exported without that or it can be blocked in the slicer.
Printed on my Prusa Mini, 0.4mm nozzle, eSun PETG black, 0.2mm layer height.