1 / 4
The chokestick - Airtight bag clip — image 1
1 / 4

The chokestick - Airtight bag clip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An airtight bag clip, print-in-place, no support.

Rating
4.563 / 5
Likes
462
Downloads
1,425
Makes
20
Views
8,894
Reviews
16

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Public Domain

Features

This is a design I made in OpenSCAD after discovering the  Slide Zipper at my favorite 100 Yen store. After a few iterations, I ended up with a model that prints in place without supports, that is monolithic (no movable parts), durable and, most of all, airtight !

 

Printing

On my i3 Mark 3 S+, the small one (for 11 cm bags) prints in under an hour, add about 30 minutes for the large one (for 22 cm bags).

If you own an i3 mk3, I recommend using my gcode files, otherwise follow these guidelines:

☝Above all, orient the model 45 degrees with regard to the X axis, in order to minimise the risk of the print getting ripped off the bed.

  • 0.15 layer height
  • 4 top layers
  • 4 bottom layers
  • 2 walls
  • 20% infill (I used Gyroid)

These settings are for the no compromise performance. If you need speed or filament optimization, go ahead and try more conservative settings if you just want non-apocalypse usage.

No support is needed if your first layer adhesion is good. The first layer should look like this:

But if you don't trust your bed adhesion, you can add supports ("Touching build plate" / “Support on build plate only”). External supports will not interfere with the final object.

Quick Tip

A happy user going by @A_Str8, commented here that he added simple discs directly using Prusa Slicer in order to secure adhesion. Give it a go !

Update - August 2022

By popular request of one fantastic user, I created a 12" Version that fits a widely used bag format in the USA. In order to make it fit on the MK3S bed, I had to shorten some features which makes it a little bit trickier to use for the untrained. I advise printing one of the shorter sizes first to get a grip on the insertion gesture. Please note that this special version is still under test.

Customization

You can easily make custom Chokesticks by loading the model file in OpenSCAD and simply setting your bag opening width.

If you can't use OpenSCAD, just ask me to do it for you. Leave a comment here or send me a message through my profile page.

Hey ! It's public domain, do whatever you want

Of course, a link back to here is highly appreciated but not mandatory. Enjoy. 😊

Nice people can also buy me a coffee at ko-fi, they take 0 fee !

 

Tags