Vacuum Cleaner Replacement Wheel (Siemens Z3.0)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the wheel of a Siemens Z3.0 vacuum cleaner. FreeCAD model included.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 153
- Makes
- 3
- Views
- 936
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This model replaces the wheel of a Siemens Z3.0 vacuum cleaner.
Measurements
All measurements shown in mm.
Print Settings
The model is split in half for better printability, it needs to be printed twice.
Print preferably in ABS with 4 wall lines or more, at 0.2 mm layer height.
Important note: An elephant foot would lead to a bulge at the running surface and should be avoided. If your printer is susceptible to this kind of artefact, a good way of mitigating this is to shrink the first few layers in XY direction; search for “XY First layer compensation” or alike in your slicer of choice. Usually one layer already works wonders, compensation on more layers will add a slight chamfer in the worst case.
Post Print Instructions
Glue the two half wheels together. To help with the alignment and for improved stability of the axis, a M2x30 countersunk flat head screw can be added to the central bore:
