1 / 1
Anycubic Kossel RedLizard hotend mounting block
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here's a mounting block that will allow you to mount the RedLizard hotend to the stock cooling shroud of the Anycubic…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's a mounting block that will allow you to mount the RedLizard hotend to the stock cooling shroud of the Anycubic Kossel printer. You'll need 4 x 2.5mm screws with round head that will screw into the hotend, and you'll need to remove the E3D groovemount adapter that comes on the hotend. You'll also need to readjust your probe offset and your printer's height (you'll have slightly more height after this).
Category: 3D Printer Parts