1 / 6
Minimalist Playdate Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalist stand for the Panic Playdate
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 45
- Makes
- 1
- Views
- 1,720
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What you'll need
- 2x M2x4mm flat head screws https://www.mcmaster.com/91420A001/
- 2x low profile M3x10mm socket headscrews https://www.mcmaster.com/92855A310/
- 3x 15x3mm magnets (thickness measured to ~2.6mm than 3mm as listed) https://www.amazon.com/15x3mm-Refrigerator-Magnets-Fridge-Whiteboard/dp/B07VNCHT8J
Filaments that I used
- Body: Proto-Pasta yellow matte fiber https://www.proto-pasta.com/products/matte-fiber-htpla-yellow
- Base: Proto-Pasta dragon scale purple https://www.proto-pasta.com/products/dragon-scale-purple-htpla
- Base (alt): Proto-Pasta Composite carbon fiber PLA https://www.proto-pasta.com/collections/all/products/carbon-fiber-pla
Notes
Make a pause at 3.2mm (layer 21 if you're printing at 0.2mm layer height) to put the magnets in. Use supports under the two M3 screws if you're having trouble with the overhangs.
Your printer might need to be carefully calibrated first, as the tolerance for the M2 screws is really tight to align with Playdate's holes.
Shameless Self Plug
If you're in the States, I'm also selling this on Tindie! You'll be supporting me and my work when you buy from my store.