1 / 20
Angled down replacement blower fan part cooling ducts for J-Head, CR10 or other hotend.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement cooling layer ducts to replace the OEM-supplied ones that cool the heating block, not your part.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is printable with or without supports, but only from the build plate.
Printed with internal supports, it can be difficult to remove without destroying the print, in my experience.
Print Settings
Printer:
Any Printer
No
Supports: Yes*/No
*Supports only permitted from build plate.
Resolution:
Line Height: 0.10 - 0.20 mm
Line Width: 0.30 mm
Infill : 30-100%
Filament: Any ABS, PLA, PLA PLUS (+), PETG
Notes:
Category: 3D Printer Parts