SOVOL SV02 Ender 7 style fan shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a Sovol SV02 mod of the MBOT3D (Ender 7) fan shroud designed to work with a 40x20 fan
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 82
- Makes
- 0
- Views
- 915
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
This is a Sovol SV02 mod of MBOT3D MK2 Remix design from Schnabulation, I took a lot of time to design it because working from his STL was not easy and I'm not a good fusion360 designer.
- I removed the hinge so now it is a single rigid part (it was long enough to design it as is).
- Designed for a 40x20 fan, I used a Noctua NF-A4x20 PWM which is really silent.
- An internal fan duct is also provided, using a silent fan as the noctua provide enough air flow to print ABS and other high temperature materials.
- No need to drill or modify the SV02.
- Compatible with my other mod : Sailfin Direct Drive for the SOVOL SV02 https://www.printables.com/fr/model/238819-sovol-sv02-sailfin-direct-drive-mod
You can print it with few walls, even 1 wall should work if you want to chase any extra gram. I printed the final version using 2 walls.
It will require supports for the central part (see picture), I used the "conical support" option in Cura.
I recommend ABS as the fan ducts are touching the insulating material covering the heat block. So far I had no problem with that, after 150+ hours printing ABS and other filaments with this design.
Category: 3D Printer Parts