SONY A7C Eyepiece / Eye cup
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eyecup Eye piece for the SONY A7C , without this accessory using the camera is painful under sunny conditions
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 185
- Makes
- 0
- Views
- 1,599
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Adapted from the excellent design of Jack Mason for Olympus OM10 SLR Eye Cup https://www.myminifactory.com/object/3d-print-olympus-om10-slr-eye-cup-60283
The hotshoe version also use the sony hotshoe design from Anatoly S. https://grabcad.com/library/sony-hotshoe-cover-1
Good news : I consider that this eyepiece design is definitely more comfortable than the Amazon / Aliexpress one I own (18$ , not really cheap), hence for now this is probably the best eyepiece you can find for a A7C. Nota : On my pictures you can see that I shaved the Aliexpress one because it is made of stiff TPU and is too stretch to be comfortable.
If you want to re-use my Fusion 360 design you will be horrified as I'm a noob at 3D design AND working from a STL is not really comfortable.
You can find here several designs depending of the material you will use and your printer capabilities. The best design is definetely the "A7C_Eyecup_Flipscreen_Ready.stl" version, but if you try to print it you will face several challenges :
- When printed with 100% TPU it won't stand firmly on the camera
- If you try to make a material change during the print (let's say you print 50% TPU then 50% PLA) you'll notice that PLA and TPU don't stick enough together.
Hence you'll have to mix TPU+PLA on some layers to get a durable accessory. I printed it with PLA + TPU, on the first picture you can see Carbon PLA + TPU then on other red PLA + TPU. Thank you to my SOVOL SV02 and Cura for this.
You can also print it using 100% PLA/PET/ABS. The comfort is not so bad.
If you prefer a full TPU accessory, use the Tight_TPU_Eyecup_Sony_A7C.stl (you will need to remove it if you want to flip the screen, but on a sunny day it is still a better choice than nothing.
Enjoy your journey with the missing accessory for the wonderful A7C
FEEDBACK July/2022 : 2 months and several treks later, the Eyecup_Flipscreen_Ready version is still fully operationnal, still satisfying.
Print Settings
Printer:
SOVOL SV02
Supports:
No
Resolution:
0.2
Infill:
NO
Filament: TPU TPU
Notes:
No support needed
Infill is not necessary/usefull
Use 3 walls and enable thin walls
You can enable "make overhang printable" in Cura to get a smoother design
Post-Printing
TPU will probably make stringing, easy to clean afterwards
How I Designed This
FUSION 360
Category: Camera