1 / 3
Hanging self-watering pot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hanging self-watering plant pot with jute/hemp yarn decoration.
- Rating
- 4 / 5
- Likes
- 63
- Downloads
- 210
- Makes
- 3
- Views
- 1,449
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What you need:
- The 3d printed thing
- Yarn with about 3mm in diameter (jute/hemp/flax)
Print settings:
For water tight result recommend settings bellow and also read these articles
- https://help.prusa3d.com/article/watertight-prints_112324
- https://blog.prusa3d.com/watertight-3d-printing-pt1-vases-cups-and-other-open-models_48949/
Outer of the pot:
Layer height: 0.15 - 0.2mm
Temperature (PLA): 220 °C (upper limit of temperature recommended by the manufacturer)
Perimeters: 3 - 4
Brim: yes
Inner of the pot:
Layer height: 0.3mm
Brim: yes
How to wrap pot:
Pull string through the loop on the side with the longer overhang, all the way down and wrap up. And finish at the loop on the other side.
