1 / 5
Jaffa Knife
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added holes and sliced for printing
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 150
- Makes
- 0
- Views
- 555
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
https://www.thingiverse.com/thing:2586684
I needed to ‘rotate’ the knife and add holes for support after slicing. Sliced at 148.58 from bottom of handle.
The middle hole is 8.1mm for a fiberglass rod I had. You can change the hole size for your main rod you want to use. The hole is 50 mm tall.
The two side pin holes fit a 2mm brass/nickel rod I had. They are 2.3mm wide. The hole is 10 mm tall.