1 / 4
Josef
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Happy printing!
Print instructions
For FFF printing use *.stl file
Best print in PLA
In Prusa Slicer use either 0.15 mm quality profile with variable layer height or 0.10 mm detail profile
For the supports choose pattern angle of 90 degrees
Be extremely careful while removing supports over the goggles!
Use wire cutters and exacta knife to cut small pieces of supports until you free the goggles up
For resin printing use *.3mf file which is hollow inside