Winding Knob for Dive Rite Reels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement winding knob for Dive Rite dive reels (will probably fit models from other manufacturers as well).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 32
- Makes
- 0
- Views
- 517
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement winding knob for Dive Rite dive reels (will probably fit models from other manufacturers as well).
Comes with a 0.5 mm and a 1.0 mm washer to go between the knob and the reel, to allow you to install it for a fit without too much play, but still avoid the bolt protruding on the line side, which can lead to snagging when deploying and winding in the line.
Update (5 Sept 2022): The original design had the problem that the bolt could start to unscrew or tighten down when winding the reel with the button. I have changed the design to include a stem to go inside the button, either alone or as part of the washers. This way the bolt can be tightened against the stem, making it less likely to move either direction.
Category: Sport & Outdoors