Sous Vide Bracket - Fits Original Anova Precision Cooker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The bracket from my original Anova sous vide broke. I found this great design…
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 392
- Makes
- 9
- Views
- 1,984
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
If you are looking for the bracket that attaches the Anova to the water bath, see my companion design here: Sous Vide Water Bath Bracket - Fits Original Anova Precision Cooker by Stefan | Download free STL model | Printables.com
The bracket from my original Anova sous vide broke. I found this great design https://www.thingiverse.com/thing:1635640 and it worked perfectly but the fit wasn't quite right and I couldn't remove the lid from my container without unclamping the bracket so I decided to design one that more closely matched the original bracket.
Note: If you are looking for the clamp I have that design as well which you can find here: https://www.printables.com/model/358844-sous-vide-water-bath-bracket-fits-original-anova-p
Printing Instructions
I recommend polycarbonate simply because it can handle higher temperatures. I used ABS (from Hatchbox) but it eventually warped. I tried Prusament Polycarbonate and haven't had an issue since.
Print with the flat side down (opposite orientation when installed and using with Anova) and use support on the build plate. I recommend at least 50% infill, I tried with 15% and it warped after a few uses.
Please post a comment if you are successful with other filaments/infills!
Updates or Improvements
I have included the .step file which can be used to modify my design in your favorite CAD program
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50%
Filament: Polycarbonate
Category: Kitchen & Dining