1 / 2
Tolerance Tree
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to test print tolerances at different layer heights, calibrations, and slicer configurations
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 328
- Makes
- 4
- Views
- 998
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I put a flat edge on one side to optionally print vertically and included a selection of various tolerance tests. The cylinders are designed to pop out if tolerance is adequate. There is a taper on the bottom to avoid any first layer squish issues.
#1 is 0.1 to 0.9mm in 0.1mm increments
#2 is 0.05 to 0.85 in 0.1mm increments
#3 is 0.05 to 0.45 in 0.05mm increments
#4 is 0.6 to 1.0mm in 0.05mm increments
#5 is 0.2 to 0.6mm in 0.05mm increments