1 / 7
Double Air Duct - Tobera de Aire Doble — image 1
1 / 7

Double Air Duct - Tobera de Aire Doble

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tobera doble para enfriamiento PrusaI3, de mi autoría.

Rating
0 / 5
Likes
1
Downloads
12
Makes
0
Views
147
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Tobera doble para enfriamiento PrusaI3, de mi autoría. Prototipo que intenta enfriar el extrusor y la pieza (mejora notablemente los puentes). Son 3 piezas que traban entre sí con la pieza central que encastra en el soporte de Hotend tipo E3d (que he publicado anteriormente).
Mi impresora tiene un Hotend Argento, por eso, dejo esta descripción solo en castellano.
Se imprime SIN SOPORTES, los ángulos como están puestos los STL en la cama lo permiten.
Monta 2 ventiladores de 50mm atornillados con tornillos y tuercas de 3mm. la medida esta con tolerancias de 0.2mm y se insertan las tuercas con un poco de presión.
If you need english translation, just ask!

------ Now, in english -------
Double Cooling Duct for Prusa I3, E3D like Hotend. Theese are three pieces that match my previous published E3D Holder and allows you to use 2 50mm cooling fans. The air is divided sending part of it to the nozzle in order to cool the melted plastic.
Increase the quality of bridges and the finishing of little detail parts printed.
Try it and let me know how did it work.
I'm using it and I'm very pleased with the result.
Note: Used two pieces of masking tape to secure the back part of the ducts, to the hotend carriage and holding in place.

Print instructions

Category: 3D Printer Parts Print Settings

Printer Brand: RepRap

Printer: Prusa I3

Rafts: No

Supports: No

Resolution: 0.2 / 0.25

Infill: 20%

Notes:

Imprimir sin soportes, como están los STL

How I Designed This

Designed with OpenSCAD

Diseñado con OpenSCad

Tags