Simple Standing Photo Frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple photo frame in 2 sizes (6x4" / 15x10cm, 7x5" / 18x13cm) and 2 orientations, designed to stand on a desk.
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 171
- Makes
- 1
- Views
- 1,165
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
Introduction
I designed this simple photo frame to hold a 15x10cm photo on my desk and wanted to quickly share it on here in a few different sizes and orientations. Have a look at the “Assembly” model in the 3d viewer to see the whole thing.
Printing Tips
I printed mine in PETG, with a 0.25mm layer height, and no supports. Print the model face-down, as in the 3rd photo, so no supports are required!
Assembly Tips
My design has 2 parts, the frame, and a ‘retainer’ plate that holds the photo in with a friction fit - I added a dab of CA glue (super glue) in the corners as an extra measure.
Additional Tips
To get the exposed infill pattern on the retainer as in the photos, adjust your print settings to print no top or bottom horizontal infill layers. Adjust the infill type and density to achieve the desired effect. You can also use a box-modifier to remove the top and bottom infill layers, leaving only some infill around the edges, as in the example print in the photos.