1 / 4
LGX adapter for VORON MGN12 X-carrige — image 1
1 / 4

LGX adapter for VORON MGN12 X-carrige

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A new adapterplate for mgn12 x-carrige that u screw from the front

Rating
0 / 5
Likes
23
Downloads
208
Makes
0
Views
2,225
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Did a remodel of the LGX 2-part adapterplate since i didnt like the screws going from behind, (behind the cablechain) and they vibrated loose after 1-2 rolls of filament.

Removed the e3d fastener in the bottom, removed the old AB ducts, removed the 2-part design, added fastener from the front (requires M3x45, m3 nut and new x-carriage), added clearence to both the toolhead screws and the upper carriage screws, redid the holes so its printable (no chamfers), made a MGN 12 carriage for both original and euclid.

 

Made in fusion 360, credits to the original Voron team.

 

Printsettings:

4walls, 5 top/bottom, 40% grid infill, 0.2 layer, 0.4 width, no support.

Update 220807: Made the holes for the M3x45mm screws 1.5mm deeper.

Tags