Ice cold Beer and soft drink Seidel
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€11.51 – €14.07 net (excluding VAT)
For file: CoolSodaBox-V9_13h35m_0.20mm_240C_PETG_ENDER3BLTOUCH.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €12.79 excluding VAT (range midpoint).
- Weight reported by the author
- 154 g
- Print time reported by the author
- 13.58 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Crushed ice inside provides a cold drink for several hours.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 41
- Makes
- 0
- Views
- 460
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Put crushed ice inside. Since the seidel has an insulating layer against the outside, it will keep the drink cold for several hours.
Especially if your drink is refrigerator cold in the first place.
The drink will go from 4 degrees celsius (normal fridge temp) down to about 0 degrees and will become colder than straight from the fridge.
See improved versjon (V2) here:
https://www.printables.com/model/251825-ice-cold-beer-seidel-v2
You can print for 3 sizes of beer and soda can:
| Box volume | Box size | Prefix name for STL and 3mf files |
|---|---|---|
| 330ml | 66 x 115 mm | 330 Normal |
| 330ml | 59 x 140 mm | 330 Slim |
| 0.5 liter | 66 x 168 mm | 500 Normal |
No support is needed for any of the parts.
It includes a gasket that ensures that water does not leak out when the ice begins to melt. Print the gasket in TPU. You can put some cooking oil on the gasket to make sure it is tight.
The seidel can also be used without a can. It is then recommended to prime it with food-safe epoxy before using it as a drinking glass without a beer or soda can.
Use the iceFunnel to make it easier to get the crushed ice inside. Put the box in the freezer until you are ready to use it.
Print with 10-15% filling and get an insulating air layer towards the outside.
To make it easier to get the ice in, print out the IceFunnel and place it as shown in the picture. Pour the crushed ice inside and shake until all the ice has fallen down in to the cavatie.
Screw on the bottom lid and put it in the freezer until you are ready to use it.
Do not pour only water in, as it will crack the box when it freezes.
