Zerode Katipo Rear Mudguard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rear mudguard/fender to reduce the amount of debris that get flung into the frame and pivot bearings on a Zerode Katipo
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 104
- Makes
- 1
- Views
- 922
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
The Zerode Katipo has a fairly narrow gap between the rear triangle and the main frame by the main pivot bearings. I found that rocks and mud would easily get in there and wasn't doing the frame any good. The rear wheel was also flinging it straight into the main pivot bearings.
This small mudguard/fender reduces the amount of debris that get flung at the frame and bearings. It does not interfere with the frame when the rear shock is fully compressed. It is designed to fit all the contours of the rear triangle and has integrated channels for two zip ties to hold it to the frame. It also has a channel which neatly houses the rear brake hose.
- I printed in PETG with 6 perimeters and 20% infill.
- Use a 2.4x1mm zip tie to mount to the existing brake hose mount
- Use a 3.2x1.3mm zip tie to secure the other side of the mudguard to the frame