1 / 2
Olympus OM to e-mount body adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Olympus OM to e-mount body adapter adapted from the model by Molotovec on thingiverse.
- Rating
- 4 / 5
- Likes
- 21
- Downloads
- 189
- Makes
- 1
- Views
- 812
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Adapted from the model by Molotovec on thingiverse.
The original design wouldn't set the aperture control to Manual, wouldn't lock properly, and the thickness in the e-mount section was too thin for my new thick OM lens.
Corrected all those issues for myself, and sharing the love.
Tested on an Osawa MC 75-260 and an a6000 body.
Printed in PLA with supports everywhere, 20% infill, 3 walls with a 0.3mm nozzle, 0.2mm layer thickness.