K40 Air Assist - Side Inlet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an air assist nozzle for a K40 Chinese laser cutter, based on the original model by VanBot112 and the remixed…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 77
- Makes
- 1
- Views
- 438
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is an air assist nozzle for a K40 Chinese laser cutter, based on the original model by VanBot112 and the remixed version by Venomouse. I changed the air inlet so that it comes in from the side because I'm using the positioning laser mount by Crashoverride which blocks the air tube coming in.
I didn't want to use the standard "over the laser" style air assist nozzles (venturi effect is bad, m'kay?), and I think this is the best alternate design that I've seen.
Print Settings
Printer:
Hictop 3DP-11
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
40%
Notes:
I've printed this most successfully without any support on the tube inlet or the air outlet - I found that the support in these areas is too difficult to remove. Model is best printed upside-down (with the air spout thingy pointing up)
Category: Parts