Game of Thrones Title Card Lithophane
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 160mm x 92mm x 5.60mm.
- Rating
- 5 / 5
- Likes
- 57
- Downloads
- 284
- Makes
- 3
- Views
- 2,035
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Custom lithophane stand included.
Software used:
Photoshop, Blender, Meshmixer, S3D.
Dimensions: 160mm x 92mm x 5.60mm.
Print settings and information:
https://www.gadunky.com/litho-print-settings/
Note: This is a large and detailed stl file and may put some systems/slicers under pressure. It slices best in Slic3rPE, Cura 3.6+ or S3D.
A note on slicing in Simplify3D:
It’s easiest to slice the lithophane in Cura(or Slic3rPE) as there’s an extra step in Simplify3D due to the way the lithophanes are created(this by design to allow additional editing/printing options for more advanced users).
If you want to use Simplify3D you just need to do the following:
Load the lithophane STL into S3D as normal.
Click Mesh–Separate Connect Surfaces
Slice as normal
The added bonus of doing this is you can re-crop the image into the frame if you wish, or easily resize or remove the frame altogether. Using this method you can also print the frame in one colour/material and the lithophane in another if your printer has that option.
If you don’t do the above in S3D there may be a tiny gap between the frame and the lithophane when you actually slice the model.
Check out more on my site: https://www.gadunky.com/
Print instructions
Print @ 0.1mm or 0.12mm layer height. 6 walls/shells and 100% infill.
Recommended material: Colorfabb Standard White PLA (it helps with the Blaze/hot look)
More info @ https://www.gadunky.com/litho-print-settings/