1 / 5
Reprap Full Graphic LCD housing for Hypercube
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of d3delta3d's "Reprap Full Graphic LCD housing." Changes made: Moved the cable access to the bottom…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 89
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a remix of d3delta3d's "Reprap Full Graphic LCD housing."
Changes made:
- Moved the cable access to the bottom of the housing
- Moved the fastening holes to allow it to be attached to 3030 extrusion
- Modified the emergency stop button to include a shroud to protect it from being pressed accidentally.
- Adjusted position of SD card slot.
The front cover is held on with 2 x M3 x 16mm screws and nuts and 2 x M3 x 25 screws.
The emergency button shroud is glued on with a little super glue.
Print Settings
Printer:
Hypercube Evolution
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20
Filament:
3D Solutech PLA
Yellow & Red
Notes:
The stl's are in the orientation that I used when printing.
Category: 3D Printer Parts