Macbook Pro 14" vertical stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another vertical laptop stand, this time for the macbook pro! hooray!
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 103
- Makes
- 1
- Views
- 968
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
This is just another vertical macbook pro stand. It may look remixy, but there isn't a lot of variety for shoring up a vertical laptop stand. I sketched this out in shapr3d because I couldn't find my commercial laptop stand anywhere.
Filament: prusament petg clear green
Supports: nope
layer height: anything you like. I printed this with a 0.6mm nozzle with the 0.3 detail preset in PrusaSlicer
Infill: I used 25% adaptive cubic, but you can probably do fine with the default 15%. Print time was not noticeably impacted until I toggled infill up past 60% because of how skinny the solids are
remixes: go wild. it's triangles and a rectangle. the weirder the better, IMO.
I'm including my gcode for my Prusa Mini for the sake of example. Once again, this is for a 0.6mm nozzle and I have an extra bit of feed because I have a Revo hot end and also throw a retract at the end of the prints so I can swap nozzles without unloading my filament.