Octoprint Enclosure Control Box
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.87 – €1.06 net (excluding VAT)
For file: Temp_and_Fan_Cover_0.15mm_PETG_MK3S_1h8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.96 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.14 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Add Relays to power on 3D printer and control fans, heaters or lights. Also adds Temperature and Humidity Display.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 53
- Makes
- 0
- Views
- 870
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
- Enclosure Control via Raspberry Pi 4 and Octoprint, Power on/off Printer, Lights, Heater
- Displays Temperature and Humidity within enclosure.
Items you will need
- SainSmart 4-Channel Relay Module
- Raspberry Pi 4 with Octopi Installed
- Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor
- 4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic (200mm long)[ID:4424]
- PWR ENT RCPT IEC320-C14 PANEL QC 1 each
- PWR ENT RCPT NEMA5-15 PANEL QC 4 each
- Relay to Pi PCB OSH Park, Files for board PCB Files located in Google Drive Link below.
- Heater if required: Hoffman DAH1001A 115V Electric Heater or similar (ebay)
Required Plugins include Enclosure, PSU Control and PSU Control - RPi.GPIO, to get the Temp sensor display on front page also include Dashboard plugin.
