Mastitis Test Paddle (Diary Cow)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.60 – €5.62 net (excluding VAT)
For file: No Ironing Mastitis Test Paddle_0.3mm_PLA_MK3S_3h51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.11 excluding VAT (range midpoint).
- Weight reported by the author
- 90 g
- Print time reported by the author
- 3.86 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mastitis Test Paddle designed and optimized for 3D Printing. Fusion 360 Files with parameters included.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 47
- Makes
- 1
- Views
- 362
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Layer Height is preset to 0.3mm
I have made the paddle cups one layer height lower than the base, so if you want to ensure a water tight seal you can set ironing from 0 - 1.7mm layer height (2mm - layer height). this is just so it doesn't iron the whole surface of the base.
I have included the design files and the layer height is an adjustable parameter, so if you want to print it in a different layer height its an easy change and everything should just work.
feel free to adjust the handle length for fitting the model on your build plate if your not using a mk3.