1 / 1
Low Profile Extruder Visualizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A low profile remix of GerryPB's Extruder Visualizer, using 6x1mm magnets.
- Rating
- 3 / 5
- Likes
- 18
- Downloads
- 60
- Makes
- 0
- Views
- 794
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A low profile (6.55mm depth) remix of GerryPB's excellent Extruder Visualizer.
Place 4 6x1mm magnets on top of the fixing screws of the extruder step motor (optional, easier position adjustment). Glue 4-6x1mm magnets to the bottom of the Back model.
For the Frontgear, there are 2 options:
- 1x6mm, glue a 1x6mm in the end of the shaft and place a 8x3mm magnet on the axis of the extruder motor;
- 6x6mm, insert a 6x6 magnet (or 6-1x6mm) in the end of the shaft (just push it in place or glue it).
I had some issues with option 2. It would jam quite often. Option 1 works well but requires an additional 8x3 magnet.
Hope this helps.