Ridgid 18V Folding Panel Light (Gen5X) Mounting Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mount bracket to hold the Ridgid 18V Folding Panel light for storage and for use above a workbench.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 88
- Makes
- 0
- Views
- 516
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Over designed bracket to hold the Ridgid 18V Pane Light on the wall for both storage and for use above my workbench. My garage door blocks my overhead lights and this is a great alternative to get some extra light on the workbench as well as store my panel light.
The Panel Light is designed to hang on a pair of screws, but that's a weak point of mounting and doesn't seem as solid as a properly designed mount.
This mount has both tabs to fit in the slots as well as key-way pins to go in the slots where the screws would normally mount. The key-way pins do double-duty in that they contact the wall and help provide some stability.
I printed this in PLA and with variable infill; 10% in the body and 40% in the pins. It should be strong enough but you may want to consider a higher infill.
I used 5 perimeters and 5 top/bottom layers.
Please post any makes and if you have comments, let me know!