1 / 3
Bosch Rexroth 3030 extrusion right-angle connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BOSCH REXROTH 3030 compatible design, with size variations available.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 254
- Makes
- 2
- Views
- 775
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Cap height parameter can be changed in the Fusion 360 model to create a custom component.
Use an 10mm long M6 round head screw to secure the bracket to the extrusion. A longer screw bottoms out in the extrusion and a shorter one is not providing enough thread for a secure fit.
PLA and PETG filament is probably the best material to use for printing. Use 3 perimeters and also 3 top and bottom layers with 20% infill. Print it without any supports, but rotate the bracket onto it's 45-degree side.
Other designs for BOSCH REXROTH 3030 extrusions: