Bushing for fitting a wheelbarrow tyre
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.37 – €0.45 net (excluding VAT)
For file: KottikarryPusla v1_0.35mm_PLA_MK2S_24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.41 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 24.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bushing to fit different types of wheels to a wheelbarrow
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Wheel barrow had a axle of 16mm. New wheels have 20mm hole. Also new wheels are narrower (73mm) than old ones (95mm).
So I whipped up a bushing which fits the new tires to the wheelbarrow.
80% infill to the middle section and 20% rest. What is "middle" you ask? I just put some 50% of the middle section with 80% fill to make it a bit stronger.
Lets see how well it holds up. Should be ok as new wheel has real bearings unlike the old one.
Material is PLA.