1 / 3
Lamp base for lithophane
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Lamp base with ability to wind wire under it designed for small lithophane Sphere
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 198
- Makes
- 0
- Views
- 1,813
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Lithophane is generated with
https://lithophanemaker.com/Lithophane%20Sphere.html
- Upload any image image
- check
Moon Background - Picture Angular Height (degrees): 1
- Sphere Diameter (mm):
100 - Cylinder Outer Diameter: 55
- Cylinder Height: 15
- Cylinder Thickness: 5
- Cylinder Ledge Outer Diameter: 60
Parts:
- any cable with a switch and a plug (I used locally sourced one)
- socket for light bulb - looks like from here E14 with threads (need to remove end cap)
- light bulb - 1.7W E14 LED lightbulb for fridges
Print with support :)
How to hold light bulb socket
Print bottom part with supports and not remove them (square 7mm holes) after You insert the lamp socket push those supports deeper, they should grab the socket and keep it down. An alternative would be to print those plugs separately.