Mold and Forms for large (Supertool) sized Leatherman
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts to wet mold leather and make a multitool case/sheath.
- Rating
- 0 / 5
- Likes
- 70
- Downloads
- 433
- Makes
- 1
- Views
- 1,959
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Parts to wet mold leather and make a large multitool case/sheath.
Finished inside dimensions are 4.5 x 1.5 x .75” (114 x 38 x 19mm).
BaseForm, Form, Mold, FormTrim, and Jig for a large Leatherman. Only the Form and Jig are needed but the other parts give you more options and make assembling a bit easier.
I printed the Form, FormTrim, and Jig at 4 walls and 20% infil.
Mold was printed at 4 walls and 40% infil.
Jig can also be used as the Mold but is a little harder to press. It also requires using two pieces of wood or similar items to sandwich everything between but saves on print time and material.
*Recommend flipping the Jig file in your slicer.
Update 20 July: There is a recess on the bottom of MoldSuper that matches the outline of JigSuper. This creates an indentation on leather to mark where to trim. I noticed it was 1mm longer than it should have been. This has been corrected.