1 / 4
Modular 1U Relay Rack Mount for Banana Pi M1 with HDD/SSD — image 1
1 / 4

Modular 1U Relay Rack Mount for Banana Pi M1 with HDD/SSD

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount for the Banana Pi M1 with an additional 2,5" hard disk or SSD in a modular system 1u frame for 19" racks. It is…

Rating
0 / 5
Likes
3
Downloads
22
Makes
0
Views
852
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

Mount for the Banana Pi M1 with an additional 2,5" hard disk or SSD in a modular system 1u frame for 19" racks.

It is designed to be on the left side. Use the middle and right section from https://www.thingiverse.com/thing:3690500 or any of its remixes.

USB and ethernet ports are accessible from the front via adapter cables. The front plate has built in button caps for the power and reset switches of the board.

I used a USB panel mount adapter cable (15-20cm long) and a Delock 85124 panel mountable RJ45 female to female adapter and a short (10-15cm) ethernet patch cable to make the USB and ethernet port available from the front.

Two M3x6 or M3x8 screws are needed to attach the two board mounts main part. The Banana Pi is mounted using M2,5x6 screws.

Print Settings

Printer Brand:

Ultimaker

Printer:

Ultimaker 2

Rafts:

No

Supports:

No

Resolution:

0,2 mm

Infill:

20%

Filament: DasFilament PLA Black


Notes:

The main section can be printed without support if placed face down on the print bed. The little stand is needed twice and should be printed laying flat and also without supports.

Category: DIY

Tags