1 / 5
Zhonghdi ZD-939L Hot Air Nozzle Holder — image 1
1 / 5

Zhonghdi ZD-939L Hot Air Nozzle Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I needed a version for five nozzles, so I changed @elmo2k3's nice design to this size. Since the overall width was…

Rating
0 / 5
Likes
2
Downloads
17
Makes
0
Views
163
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

I needed a version for five nozzles, so I changed @elmo2k3's nice design to this size. Since the overall width was very close to the width of the hot air station, I added two mounting brackets that are screwed to the nozzle holder with four M3x6 screws. The brackets have a third hole that matches the M4 screws on the top read side of the hot air station. I replaced the M4x8 screws there with two M4x10 screws and then the whole assembly can be fixed to the hot air station.

The mounting bracket fits on both sides, so print it twice.

Post-Printing

Required parts:

4 M3x6 machine screws
2 M4x10 machine screws

Category: DIY

Tags