Storage drawers for Voron0 0.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pair of front mounted storage drawers for the Voron 0
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 637
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
A couple of drawers to add storage to your Voron 0/0.1. I've designed them to mount using the existing nuts that you should already have at the bottom of the front extrusion (originally intended to hold the front skirt) You will also need 4 M3x16mm bolts.
As these printers are either built from scratch or from kits I've left some tolerance between the drawers and left plenty of space beneath them (I've extended the feet on my Voron0.1 for psu clearance) and they only mount from the back but they're surprisingly sturdy. The left drawer is narrower than the right because I've also designed a screen holder that takes the place of the right hand drawer, that can be found here:
https://www.printables.com/model/243337-ender-3-screen-holder-for-voron-001
Print settings aren't important, no supports, 0.2mm layer height is fine.
This will fit on Voron 0 bed but you may have to adjust or remove your skirt in the slicer.
If you found this model useful please click the 'like' button and upload a photo of your print. Also, comments and suggestions are always welcome.