1 / 1
James Webb Decoration, 80x70x40mm mirrors
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the "James Webb Decoration" decoration adjusted for using the 80x70x40mm acrylic mirrors
- Rating
- 4 / 5
- Likes
- 53
- Downloads
- 102
- Makes
- 3
- Views
- 1,011
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
This is a remix adjusted for using the 80x70x40mm mirrors from AliExpress
Mirrors
https://www.aliexpress.com/item/1005003118017119.html (2 packages / 80x70x40 gold variant)
Printing instructions
You can either use the pre-sliced .gcode files (for Prusa MK3/S/S+):
- 6x mirror123_0.15mm_PLA.gcode
- 1x center_0.15mm_PLA.gcode
or slice and print the STL files on your own (I highly recommend enabling the ironing feature in the PrusaSlicer to get a nice flat surface):
- 6x mirror_1.stl
- 6x mirror_2.stl
- 6x mirror_3.stl
- 1x center.stl
The total printing time is around 33 hours.
Assembly instructions
- Upside down, put together the inner loop (1-1-1-1-1-1)
- Upside down, put together the outer loop (3-2-3-2-3-2-3-2-3-2-3-2)
- Place the inner loop on the outer loop, and use a rubber mallet if needed
- Place the centerpiece in the middle and use a rubber mallet if needed
Installing mirrors
- Remove the back protective layer from the mirrors
- Peel off just a little bit of the front protective layer
- Install mirrors inside the frame (don't touch the uncovered parts to avoid nasty fingerprints)
- Remove the rest of the front protective layer
Arrangement
