1 / 1
12 Gauge shotshell trimmer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This for trimming off the crimp from a 12 gauge shotgun shell. It uses common utility knife blades.
- Rating
- 4.5 / 5
- Likes
- 42
- Downloads
- 373
- Makes
- 2
- Views
- 1,701
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This for trimming off the crimp from a 12 gauge shotgun shell. It uses common utility knife blades. Reverse them and use the other side when it gets dull. It should cut off the crimp about 4mm from the end. Use 3mm screws and nuts for assembly.
Print the blade holder with 100% infill
Main body can be 20% infill
Print Settings
Printer:
Voxelab Aquila
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20% to 100%
Filament:
Sunlu PETG
Category: Other