1 / 1
12 Gauge Snap Cap using recycled base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make a snap cap from a recycle 12 gauge brass base. Works for low and high brass. You will need remove the primer. Use…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 58
- Makes
- 1
- Views
- 471
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Make a snap cap from a recycle 12 gauge brass base. Works for low and high brass. You will need remove the primer. Use E6000 or equivalent adhesive to premanently attach to base.
Print Settings
Printer:
Voxelab Aquila
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
10%-20%
Filament:
Sunlu PETG
Category: Other