1 / 8
JST XH-4A Switch Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a box to add a switch inline to a JST 4 pin connector. I thought it might be useful to others.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Materials Needed
- (1) 19 x 12.5x 11mm Boat Rocker Switch (what I used)
- (1) JST XH-4A (mine came from this set. you can find them cheaper alone)
- (4) 3MM x 6mm Socket Head Screws (lid is reversible with a flat side for socket/flat head screws & an inset side for flush mount).
- (optional) a bit of PCB Prototype Board to solder the JST to (I used a bit of one of these).
- You will also need soldering materials and some wire if your JSTs are not the pre-soldered to wires type
Option 1: 1 JST slot and 1 3mm(ish) wire slot
Options 2: 2 JST Slots
