1 / 1
Moss Pole Vx_workings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Experiment with Voronoi print flat moss pole - folds and locks to become hexagonal prism
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 356
- Makes
- 6
- Views
- 3,008
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Workings but this is a viable model: Aim to create a quick print flat moss pole that folds and snaps together as a version of my other more complex upright Voronoi model. By printing flat on the build plate the print time can be greatly reduced. This model prints in just 4 hours @ 0.2mm. I've used PETG on the smooth plate.
- Ensure the build plate is very clean and z correct for successful first layer. Print slow ~ 15mm sec works well for me for first layer (added my gcode for ref)
- Carefully detach from the plate. Suggest thin card or paper to slice under
- Model will fold and snap together (with care) at the ball and socket joints. Best to roll together on a flat surface. Once locked it's surprisingly sturdy