1 / 6
SV02 LGX Lite Direct Drive
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Direct drive mod to use LGX lite extruders on the Sovol SV02
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 605
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I printed with supports and blocked out the mounting holes. I needed to ream out the bowden tube hole but after 6 iterations, it lines up with the stock extruder nicely. I mounted the extruders to the base, then mounted it on the x carriage. I put 30mm long capricorn tubing in the extruders before slipping the hot end on and securing it.
This is the extruder-motor combo:
https://www.bondtech.se/product/lgx-lite-large-gears-extruder/