1 / 9
Easy infinite cube fidget
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take on infinite cube fidget toy. At first I designed it as print-in-place model, but was not satisfied with…
- Rating
- 4.778 / 5
- Likes
- 245
- Downloads
- 2,149
- Makes
- 27
- Views
- 10,147
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My take on infinite cube fidget toy.
At first I designed it as print-in-place model, but was not satisfied with quality of top links, which have to be printed in mid air, so to not weld with cubes.
I changed design where cubes and links are printed separately and then assembled.
You need to print:
- Cube 2a x4
- Cube 2b x4
- Link x8
Recommended print settings:
- Filament: PLA, PETG
- Layer height: 0.2
- Line width: 0.4
- Wall line count: 2-3
- Top/bottom layers: 3
- Infill: 25% (or more if you prefer heavier toy)
Category: Puzzles