iPhone 13 Series (optimised for 3D printing)

I've modified the iPhone 13 models to be much easier to print. 

Print all models with the screen facing down on the bed. 

The changes I've made include: 

Removed all voids

• the model is now solid 
• no invisible gaps behind screen or camera bump 

Buttons are no longer floating objects

• Before there was a small gap around the buttons. Which would mean printing them in mid air. I've scaled them up a tiny amount to combine all bodies into one. 

The screen is now flat. With no raised lip 

• Before the screen sat proud from the edge/bezel. It was only tiny (0.1mm). But it meant the rim of the phone would start printing on the 2nd layer. And may curl up due to no bed adhesion. The 1st layer will be great now. 

These changes greatly improve the print-a-bility of the models. 
And the model remains 99.9% identical. 

If you like this model. Look at my other projects below: 👇

• Webcam Mount for iPhone
• AirTag Carabiner with Threaded Cap
• Honeycomb Carabiner
• Filament Dry Box V1

Or this blog post I wrote about Everything I've 3D printed