Large Letter Box Cover with magnetic sealing strip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This letter box plate was designed to fit our unusually large letter box, and cover the fixing nuts.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 106
- Makes
- 0
- Views
- 679
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This letter box plate was designed to fit our unusually large letter box, and cover the fixing nuts.
It incorporates recesses for magnetic strips to close and seal the flap.
The design has been tested on a Mk3 i2 using PLA and 0.2 layer height.
Print instructions
Assembly
Print both 2 parts from letterbox_v1_0_print.stl
Insert a length of into the holes at each end of the flap.
Then feed the flap through from the back of the door plate before screwing the plate to the door
WARNING: The magnetic strips are polarised and fasten together small slightly. Before fixing the strips make sure that align with the channels.
Fix the strip to the channels in flap and plate.