Prusa Mini Base Support Legs Extension with USB Port
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Foot for any printer with a 30 series t-slot frame base such as the Prusa i3 MK3S+ and Prusa Mini, no hardware required!
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 50
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A leg to make your printer taller with no hardware or disassembly required! Make some room for an extra spool of filament or tools. Just print with supports, remove them, and twist the leg into the bottom of the frame. STL may need to be adjusted to work with your printer and filament's tolerances. I added a cutout for a USB extension as well so thumbdrives can be inserted on the front. Load into your own modeling program to easily add your own features! This should work with most 30mm series t-slot frames.