Simple Rotating Drawer Child Lock
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.56 – €0.68 net (excluding VAT)
For file: child-lock_02mm_pla_mk3_45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.62 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 45 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I needed a easy child lock for a drawer, that works until the child is too smart.
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 382
- Makes
- 4
- Views
- 2,171
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a easy child lock for a drawer, that works until the child is too smart. This attaches with a screw and then pivots around the screw protected by the "pin". There is a little bit of a ridge on the back to catch the side of the cabinet and prevent the lock from rotating too far.
I used a #6 wood screw for attachment.
Video to show assembly