Three Cube Gears
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.33 – €8.96 net (excluding VAT)
For file: CubeGears2-3_0.15mm_PLA_MK3S_9h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.15 excluding VAT (range midpoint).
- Weight reported by the author
- 67 g
- Print time reported by the author
- 9.82 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Three Cube Gears by emmett from december 27, 2013 Extremely cool fidget cubes and gears in one part.
- Rating
- 4.903 / 5
- Likes
- 459
- Downloads
- 2,651
- Makes
- 57
- Views
- 14,171
- Reviews
- 31
Updated at source:
Model information
- Source
- Printables
- Category
- Math
- License
- Creative Commons — Attribution — Share Alike
Cubed Gears
A cube made from gears with a center block and pins to fit everything together.
Easily printable with PLA no supports needed. This one is printed with a two colored illusion filament. This kind of filament changes his color with the change of the print direction. For this print i used Cerise and Green. They have also Blue and Neon Yellow.
Grease the pins and put them into the center block first. The pins snap in. second put the gears on the pins. The larger gears go to the larger faces of the center block. For greasing moving parts i always use the same grease i use for my carbon fiber road bikes.
